Dosimetric investigation of high dose rate Ir-192 source with Monte Carlo method


Acun H., BOZKURT A., Kemikler G.

INTERNATIONAL JOURNAL OF RADIATION RESEARCH, cilt.15, sa.3, ss.241-249, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 15 Sayı: 3
  • Basım Tarihi: 2017
  • Doi Numarası: 10.18869/acadpub.ijrr.15.3.241
  • Dergi Adı: INTERNATIONAL JOURNAL OF RADIATION RESEARCH
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.241-249
  • Anahtar Kelimeler: Monte Carlo, high dose rate brachytherapy, Ir-192, BRACHYTHERAPY, PLUS, 12I
  • Akdeniz Üniversitesi Adresli: Evet

Özet

Background: This study aims to calculate the air-kerma strength (S-K), the dose rate constant (Lambda) and the dose rate profiles of a Gammamed 12i Ir-192 source by using the Monte Carlo technique and to compare the dose rate values with those calculated by the Abacus HDR treatment planning system (TPS). Materials and Methods: Air-kerma strength (in units of U; 1 U = mu Gy m(2) h(-1)) and the dose rate constant (Lambda) of a Gammamed 12i Ir-192 source were computed with the Monte Carlo-based code MCNP. For a single dwell position, profiles of dose rate per air kerma rate strength (in unit of U) along the x axis were obtained with MCNP and compared with data from the Abacus TPS at y=0, 1, and 2 cm. Results: The air-kerma strength and the dose rate constant of the source were calculated to 9.98x10(-8) U and 1.106 cGy h(-1) U-1, respectively. The maximum dose differences between MCNP and TPS along the x axis were found to be 1.3, 3.7 and 5.4% at distances more than 1 cm away from the source center for y = 0, 1 and 2 cm planes, respectively. Conclusion: The dose rate profiles calculated with MCNP and by the TPS show good agreement except for points located beyond the tip of the source.