Effects of biological pre-digestion of sewage sludge processed by fast pyrolysis on bio-oil yield and biochar toxicity


Merdun H., Boubacar Laougé Z., Sezgin İ. V., Çığgın A. S.

Waste Management, cilt.157, ss.149-158, 2023 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 157
  • Basım Tarihi: 2023
  • Doi Numarası: 10.1016/j.wasman.2022.12.016
  • Dergi Adı: Waste Management
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Applied Science & Technology Source, BIOSIS, Biotechnology Research Abstracts, CAB Abstracts, Communication Abstracts, Compendex, Computer & Applied Sciences, EMBASE, Environment Index, Geobase, INSPEC, MEDLINE, Metadex, Pollution Abstracts, Public Affairs Index, Veterinary Science Database, DIALNET, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.149-158
  • Anahtar Kelimeler: Aerobic digestion, Anaerobic digestion, Pyrolysis, Response surface methodology, Sewage sludge, Toxicity
  • Akdeniz Üniversitesi Adresli: Evet

Özet

© 2022 Elsevier LtdStudies on the evaluation of sewage sludge (SS) as a feedstock through thermochemical processes have gained momentum. Due to the complex structure of SS, it is necessary to determine SS treatment stage to which thermochemical processes will be added to the wastewater treatment plants and to configure the optimum process scheme. The pyrolysis process is an important process for resource recovery as bio-oil and biochar. While bio-oil is important source of the value-added products, biochar is widely evaluated as soil improver. With the aim of the designation of the optimum process scheme for pyrolysis of three different sewage sludges (SSs): raw SS (RSS), anaerobically digested SS (ANSS), and aerobically digested SS (AESS); after the investigation of thermal behaviors by thermogravimetric analysis (TGA), the optimum process conditions were investigated to obtain maximum possible bio-oil yield from fast pyrolysis of SSs. By applying the central composite design in the response surface methodology, optimum fast pyrolysis operating conditions were determined for each SS type and the fast pyrolysis products obtained under optimum conditions were characterized. While the highest HHV was achieved for RSS, lowest activation energy (Ea) and maximum bio-oil yield was achieved for AESS. The optimum fast pyrolysis operating conditions for obtaining maximum bio-oil yield as 35.75 % were determined as 485 °C and 100 mL min−1 carrier gas flowrate for AESS. While the bio-oil produced from ANSS was determined as a resource for oleic acid production, the toxicity test results revealed that biochar produced from fast pyrolysis of AESS is suitable for soil amendment.