Prof.Dr. GÜRKAN ALTAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Testing of mechanical butt joints in composite structures

ALTAN G.

MATERIALS TESTING , cilt.63, sa.9, ss.816-821, 2021 (SCI-Expanded)

Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate

Altan B., KOVAN V., Altan G.

WIND AND STRUCTURES , cilt.27, sa.1, ss.1-9, 2018 (SCI-Expanded)

Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

KOVAN V., Altan G., TOPAL E. S.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.5, ss.2197-2201, 2017 (SCI-Expanded)

Investigation of 3D printed Savonius rotor performance

Altan B., Altan G., KOVAN V.

RENEWABLE ENERGY , cilt.99, ss.584-591, 2016 (SCI-Expanded)

Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material

Altan G., KOVAN V.

MATERIALS TESTING , cilt.58, sa.10, ss.833-838, 2016 (SCI-Expanded)

An investigation on damage loads of mechanical butt joints in composite structures

Altan G., Topcu M.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.34, sa.10, ss.839-853, 2015 (SCI-Expanded)

Fatigue and static performances of butterfly joints under hygrothermal exposure conditions

Altan G., Topcu M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.127, sa.5, ss.3374-3381, 2013 (SCI-Expanded)

Assessment of the buckling strengths of composite plates impacted with different impact loads and points

Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.29, sa.23, ss.3455-3462, 2010 (SCI-Expanded)

Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures

Altan G., Topcu M.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.24, sa.6, ss.1245-1254, 2010 (SCI-Expanded)

The Effects of the Butterfly Joints on Failure Loads and Fatigue Performance of Composite Structures

Altan G., Topcu M., Callioglu H.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.17, sa.3, ss.199-212, 2010 (SCI-Expanded)

Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution

Altan G., Topcu M., Bektas N. B., Altan B.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.22, sa.12, ss.2318-2327, 2008 (SCI-Expanded)

THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF AN ALUMINIUM COMPOSITE DISC UNDER LINEARLY DECREASING THERMAL LOADING

Topcu M., Altan G., Callioglu H., Altan B.

ADVANCED COMPOSITES LETTERS , cilt.17, sa.3, ss.87-96, 2008 (SCI-Expanded)

An experimental investigation on damage loads of butterfly joints in composite structures

Topcu M., Altan G., Ergun E.

ADVANCED COMPOSITES LETTERS , cilt.16, sa.6, ss.197-204, 2007 (SCI-Expanded)

Elastic-plastic stress analysis of thermoplastic composite beams loaded by a single force

TOPCU M., CONKUR E., Altan G.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.18, sa.3, ss.181-193, 2005 (SCI-Expanded)

Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading

CALLIOGLU H., TOPCU M., Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.24, sa.8, ss.831-838, 2005 (SCI-Expanded)

Elastic-plastic and residual stress analysis of an aluminum metal-matrix composite disk under internal pressures

BEKTAS N., TOPCU M., CALLIOGLU H., Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.24, sa.7, ss.753-762, 2005 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES

Altan G.

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL , cilt.12, sa.2, ss.65-70, 2018 (ESCI)

Experimental Investigation on Thermal Conductivity of Building Materials Manufactured from Paper Wastes

ALTAN G., DEDA ALTAN B.

IJRASET : INTERNATIONAL JOURNAL FOR RESEARCH IN APPLIED SCIENCE AND ENGINEERING TECHNOLOGY , cilt.6, sa.5, ss.33-39, 2018 (Hakemli Dergi)

Soğuk Şekillendirilmiş Çelik Çubukların Eğilmesi Durumunda Oluşan Artık Gerilmelerin Hesabı

Atlıhan G., TOPCU M., CALLIOGLU H., ALTAN G.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.13, sa.1, ss.111-118, 2007 (Hakemli Dergi)

Tekil Kuvvetle Yüklenmiş Örgülü Çelik Fiber Takviyeli Termoplastik Kompozit Ankastre Kirişlerde Artık Gerilme Analizi

ALTAN G., Atlıhan G., TOPCU M.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.10, sa.1, ss.119-125, 2004 (Hakemli Dergi)

Elastic–Plastic and Residual Stress Analysis of an Aluminum Disc under Internal Pressure

BEKTAS N., ALTAN G., ERGUN E., Demirdal G.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.10, sa.2, ss.201-206, 2004 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Surface roughness effect on the 3D printed butt joints strength

KOVAN V., Altan G., TOPAL E. S., ÇAMURLU H. E.

The 8th International Conference BALTTRIB'2015, Kaunas, Litvanya, 26 - 27 Kasım 2015, ss.117-121

Periyodik hücresel yapıların titreşim davranışlarının incelenmesi: nümerik çalışma

Atlıhan G., KOVAN V., TOPCU M., ERGUN E., ALTAN G.

4th International Materials Symposium (IMSP’2012), Denizli, Türkiye, 10 - 12 Ekim 2012, ss.960-967

Elasto-plastic stress analysis of surface roughness effect on press fits

KOVAN V., ALTAN G.

6th International Scientific Conference on Tribology, BALTTRIB 2011, Kaunas, Litvanya, 17 - 19 Kasım 2011, ss.122-126

Metal Matrisli Ortotropik Bir Diskin Üretimi ve Mekanik Özelliklerinin Tespiti

ALTAN G., TOPCU M., ERGUN E., CALLIOGLU H.

11th International Materials Symposium, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.835-841

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

114

Prof.Dr. GÜRKAN ALTAN

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Testing of mechanical butt joints in composite structures

Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate

Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

Investigation of 3D printed Savonius rotor performance

Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material

An investigation on damage loads of mechanical butt joints in composite structures

Fatigue and static performances of butterfly joints under hygrothermal exposure conditions

Assessment of the buckling strengths of composite plates impacted with different impact loads and points

Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures

The Effects of the Butterfly Joints on Failure Loads and Fatigue Performance of Composite Structures

Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution

THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF AN ALUMINIUM COMPOSITE DISC UNDER LINEARLY DECREASING THERMAL LOADING

An experimental investigation on damage loads of butterfly joints in composite structures

Elastic-plastic stress analysis of thermoplastic composite beams loaded by a single force

Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading

Elastic-plastic and residual stress analysis of an aluminum metal-matrix composite disk under internal pressures

Diğer Dergilerde Yayınlanan Makaleler

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES

Experimental Investigation on Thermal Conductivity of Building Materials Manufactured from Paper Wastes

Soğuk Şekillendirilmiş Çelik Çubukların Eğilmesi Durumunda Oluşan Artık Gerilmelerin Hesabı

Tekil Kuvvetle Yüklenmiş Örgülü Çelik Fiber Takviyeli Termoplastik Kompozit Ankastre Kirişlerde Artık Gerilme Analizi

Elastic–Plastic and Residual Stress Analysis of an Aluminum Disc under Internal Pressure

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Surface roughness effect on the 3D printed butt joints strength

Periyodik hücresel yapıların titreşim davranışlarının incelenmesi: nümerik çalışma

Elasto-plastic stress analysis of surface roughness effect on press fits

Metal Matrisli Ortotropik Bir Diskin Üretimi ve Mekanik Özelliklerinin Tespiti

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim