Akdeniz Üniversitesi
Akademik Veri Yönetim Sistemi
Yayınlar & Eserler
SCI,SSCI,AHCI İNDEKSLERİNE GİREN DERGİLERDE YAYINLANAN MAKALELER
Çağlayan N., Oral O., Çelik H.K., Çinar R., De Abreu Rodrigues L.C., Rennie A.E.W., et al., "Determination of time dependent stress distribution on a potato tuber during drop case", JOURNAL OF FOOD PROCESS ENGINEERING, vol.41, 2018 (Link)
Çelik H.K., "Explicit dynamics simulation of Pecan fruit deformation under compressive loading—Part-2: Explicit dynamics simulation procedure", JOURNAL OF FOOD PROCESS ENGİNEERİNG, vol.1, pp.1-12, 2017 (Link)
Çelik H.K., Rennie A.E.W., Akinci I., "Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products", JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION, vol.11, pp.75-84, 2017 (Link) (Abstract)
Çelik H.K., "Determination of bruise susceptibility of pears (Ankara variety) to impact load by means of FEM-based explicit dynamics simulation", POSTHARVEST BİOLOGY AND TECHNOLOGY, vol.128, pp.83-97, 2017 (Link) (Abstract)
Çelik H.K., Çağlayan N., Rennie A.E.W., "Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering", JOURNAL OF FOOD PROCESS ENGİNEERİNG, vol.40, 2017 (Link)
Çelik H.K., Rennie A.E.W., Akinci İ., "Design and structural optimisation of a tractor mounted telescopic boom crane", JOURNAL OF THE BRAZİLİAN SOCİETY OF MECHANİCAL SCİENCES AND ENGİNEERİNG, vol.39, pp.909-924, 2017 (Link) (Abstract)
Çelik H.K., "Explicit dynamics simulation of Pecan fruit deformation under compressive loading—Part-1: Determination of modulus of elasticity", JOURNAL OF FOOD PROCESS ENGİNEERİNG, vol.1, pp.1-12, 2017 (Link)
Çinar R., Uçar M., Çelik H.K., Firat M.Z., Rennie A.E.W., "Pressure Determination Approach in Specific Pressure Regions and FEM-Based Stress Analysis of the Housing of an External Gear Pump", EXPERIMENTAL TECHNIQUES, vol.40, pp.489-499, 2016 (Link)
Çelik H.K., Lupeanu M.E., Rennie A.E.W., Neagu C., Akinci İ., "Product Re-Design Using Advanced Engineering Applications And Function Analysis: A Case Study For Greenhouse Clips", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, vol.35, pp.305-318, 2013
Çelik H.K., Rennie A.E.W., Akinci İ., "Deformation Behaviour Simulation Of An Apple Under Drop Case By Finite Element Method", JOURNAL OF FOOD ENGINEERING, vol.104, pp.293-298, 2011
Topakci M., Ünal İ., Çanakci M., Çelik H.K., Karayel D., "Design Of A Horizontal Penetrometer For Measuring On-The-Go Soil Resistance", SENSORS, vol.10, pp.9337-9348, 2010
Topakci M., Çelik H.K., Çanakci M., Rennie A.E.W., Akinci İ., Karayel D., "Deep Tillage Tool Optimization By Means Of Finite Element Method: Case Study For A Subsoiler Tine", JOURNAL OF FOOD AGRICULTURE, vol.8, pp.531-536, 2010
Topakci M., Çelik H.K., Çanakci M., Karayel D., Rennie A., "Structural optimization of a subsoiler", PAKISTAN JOURNAL OF AGRICULTURAL SCIENCES, vol.53, pp.281-287, 2010
Yilmaz D., Çelik H.K., Akinci İ., "Finite Element Analysis Of A Failure In Rear-Mounted Mower Pulley", Journal of Food, Agriculture & Environment, vol.7, pp.865-868, 2009
Kabas O., Çelik H.K., Ozmerzi A., Akinci İ., "Drop Test Simulation Of A Sample Tomato With Finite Element", JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE, vol.88, pp.1537-1541, 2008
DİĞER DERGİLERDE YAYINLANAN MAKALELER
Khan F.A., Çelik H.K., Oral O., Rennie A.W., "A SHORT REVIEW ON 4D PRINTING (4B YAZDIRMA (4D PRINTING) ÜZERİNDE BİR KISA İNCELEME)", International Journal of 3D Printing Technologies and Digital Industry, vol.2, pp.59-67, 2018 (Link)
Çelik H.K., Yilmaz H., Rennie A.E., Çinar R., Firat M.Z., "Determination of the Failure Susceptibility of a Flat Die Used in Biomass Pelletizing Machines by Means of FEA-Based Design Exploration", Journal of Failure Analysis and Prevention, vol.18, pp.1099-1110, 2018 (Link)
Çelik H.K., Çinar R., Kunt G., Rennie A.E., Uçar M., Akinci İ., "Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor", Ergonomics International Journal, vol.2, pp.147-147, 2018
Çağlayan N., Çelik H.K., Rennie A.W., "Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses", Tarım Makinaları Bilimi Dergisi, cilt.13, ss.107-112, 2017
Çelik H.K., Kunt G., Rennie A.E., Akinci İ., "Non-linear fem-based shattering simulation of shelled edible agricultural products: Walnut shattering by nut cracker hand tool", nternational Journal of Technology and Engineering Studies, vol.3, pp.84-92, 2017 (Link)
Çelik H.K., "Pikan Meyvesi Çekirdeklerinin Doğrusal Olmayan Sonlu Elemanlar Yöntemi Temelli Simülasyonu (Non linear FEM Based Compression Simulation of Pecan Fruit Kernels)", Akademik Gıda (Academic Food), cilt.14, ss.1-7, 2016 (Link)
Çelik H.K., Akinci İ., "Analytical and Finite Element Method Based Stress Analysis of Rotary Elements: Case Study for the Motion Transmission Gears of a Rotary Drum Mower", Journal of Failure Analysis and Prevention, vol.16, pp.293-301, 2016 (Link)
Çelik H.K., Akinci İ., "Çarpma Etkisi Altında Kalan Armut Meyvelerinin (Ankara çeşidi) Zedelenme Hacminin Doğrusal Olmayan Dinamik Sonlu Elemanlar Analizi ile Belirlenmesi (Determination of Bruise Volume of Pear Fruit (Ankara Variety) under Mechanical Collision Effect by means of Non Linear Dynamics Finite Element Analysis)", Tarım Makinaları Bilimi Dergisi, cilt.12, ss.1-10, 2016 (Link)
Çelik H.K., Akinci İ., "Tamburlu Çayır Biçme Makinesi Hareket İletim Millerinin Analitik ve Sonlu Elemanlar Yöntemi ile Gerilme Analizi (Analytical and Finite Element Method Based Stress Analysis of the Motion Transmission Axels of A Rotary Drum Mowe)", Tarım Makinaları Bilimi Dergisi, cilt.11, ss.247-255, 2015 (Link)
Çelik H.K., Karayel D., Lupeanu M.E., Rennie A.E.W., Akinci İ., "Determination of Head Losses in Drip Irrigation Laterals with Cylindrical In-Line Type Emitters through CFD Analysis", Bulgarian Journal of Agricultural Science, vol.21, pp.703-710, 2015 (Link)
Çelik H.K., Rennie A.E.W., Karayel D., Akinci İ., "Determination Of Flow Parameters Through Cfd Analysis For Agricultural Irrigation Equipment: A Case Study For A Mini Valve", Journal of Agricultural Machinery Science, vol.7, pp.231-239, 2011 (Link) (Abstract)
Topakci M., Çelik H.K., Çanakci M., Karayel D., Rennie A.E.W., " Structural Optimisation Of A Subsoiler", Pakistan Journal of Sientific and Industrial Research, vol.53, pp.281-287, 2010 (Link) (Abstract)
Çelik H.K., Karayel D., Çağlayan N., Akinci İ., Rennie A.E.W., "Rapid Prototyping And Flow Simulation Applications In Design Of Agricultural Irrigation Equipment: Case Study For A Sample In-Line Drip Emitter", Virtual and Physical Prototyping, Vol. 6 (1): 147-156, vol.6, pp.147-156, 2010 (Link) (Abstract)
Çelik H.K., Yilmaz D., Unal N., Akinci İ., "Failure Analysis Of A Location Axle In Tracked Tractor", Journal of Failure Analysis and Prevention, vol.9, pp.282-287, 2009 (Link) (Abstract)
Topakci M., Çelik H.K., Yilmaz D., Akinci İ., "Stress Analysis On Transmission Gears Of A Rotary Tiller Using Finite Element Method", Akdeniz Üniversity Journal of the Faculty of Agriculture, vol.21, pp.155-160, 2008 (Link) (Abstract)
Çelik H.K., Topakci M., Yilmaz D., Akinci İ., "Çizelin Yapısal Ve İşlevsel Elemanlarında Sonlu Elemanlar Yöntemi Ile Mukavemet Analizi", Tarım Makinaları Bilimi Dergisi, vol.3, pp.111-116, 2007 (Link) (Özet)
Çelik H.K., Uçar M., Çavdar A., "Hidrolik Boom Tipi Örnek Bir Krende Statik Yükleme Sonucu Oluşan Gerilmelerin Sonlu Elemanlar Yöntemi Ile Incelenmesi", Makine Teknolojileri Elektronik Dergisi (MTED) , vol.4, pp.23-30, 2007 (Link) (Özet)
HAKEMLİ KONGRE / SEMPOZYUMLARIN BİLDİRİ KİTAPLARINDA YER ALAN YAYINLAR
Çelik H.K., Akinci İ., "Sabit Mesnetli Basit Bir Kiriş Elemanda, Tek Eksenli Yükleme Koşulunda Ortaya Çıkan Gerilme Değerlerinin Analitik, Deneysel Ve Sayısal Yöntemler Ile Belirlenmesi", 29. Ulusal Tarımsal Mekanizasyon ve Enerji Kongresi (TARMEK-2015), DİYARBAKIR, TÜRKIYE, 2 Eylül - 5 Şubat 2015, cilt.1, ss.1-1
Çelik H.K., Rennie A.E.W., Dowson D., Eatough A., Eatough J., Akinci İ., "Deformation Simulation Of A Tyre Safety Cage In Testing Of Agricultural Vehicle Tyres", International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015, St Petersburg, RUSYA, 26-28 Mayıs 2015, vol.1, pp.172-183
Çelik H.K., Rennie A.E.W., Akinci İ., "Predicting Limit Draft Force For A Chisel Tine Using Fea Based Simulation", 5th International Conference -Trends in Agricultural Engineering (TAE 2013), PRAGUE, CEK CUM., 3-6 Eylül 2013, vol.1, pp.112-117
Çelik H.K., Akinci İ., "Tarım Makineleri Tasarımı Ve Geliştirilmesinde Bilgisayar Destekli Tasarım Ve Mühendislik Uygulamaları", 27. Tarımsal Mekanizasyon Ulusal Kongresi (TARMEK-2012), SAMSUN, TÜRKIYE, 5-7 Eylül 2012, cilt.1, ss.432-440
Çelik H.K., Çağlayan N., Çinar R., Uçar M., Ersoy H., Rennie A.E.W., "Stress Analysis Of A Sample Marine Crane’S Boom Under Static Loading Condition", 5th International Mechanical Engineering Forum, PRAGUE, CEK CUM., 20-22 Haziran 2012, vol.1, pp.246-256
Lupeanu M.E., Brooks H., Rennie A.E.W., Çelik H.K., Neagu C., Akinci İ., "Design For Manufacture Using Functional Analysis And Cad Mould Simulation For Rapid Prototyping And Rapid Tooling", ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Advanced Manufacturing Processes, (ESDA2012-82021), Nantes, FRANSA, 2-4 Temmuz 2012, vol.1, pp.63-70
Çelik H.K., Rennie A.E.W., Akinci İ., "Non-Linear Stress Analysis For The Bolt Connections Of Chisel Tine Using Finite Element Method", International Conference of Agricultural Engineering (CIGR-AgEng 2012), VALENCIA, ISPANYA, 8 Temmuz - 12 Ağustos 2012, vol.1, pp.8-8
Lupeanu M.E., Rennie A.E.W., Neagu C., Çelik H.K., "Product Optimisation By Rapid Manufacturing And Targeted Functional Analysis: A Case Study For A Pump Impeller", 16th European Forum on Rapid Prototyping and Manufacturing (AEPR’11), Paris, FRANSA, 21-23 Haziran 2011, vol.1, pp.14-14
Çelik H.K., Hambali R.H., Rennie A.E.W., Akinci İ., "Deformation Simulation Of Additive Manufacturing Fdm Parts: A Case Study For Greenhouse Clips", 12th Rapid Design, Prototyping & Manufacturing Conference (RDPM 2011), LANCASTER, INGILTERE, 17-17 Ağustos 2011, vol.1, pp.155-162
Çelik H.K., Rennie A.E.W., Topakci M., Akinci İ., "Sizing Optimisation Of A Subsoiler Framework Using Advanced Engineering Tools", XXXVI CIOSTA and CIGR Section V Conference, Vienna, AVUSTURYA, 29 Haziran - 1 Temmuz 2011, vol.1, pp.9-9
Hambali R.H., Çelik H.K., Smith P., Rennie A.E.W., Uçar M., "Effect Of Build Orientation On Fdm Parts: A Case Study For Validation Of Deformation Behaviour By Fea) ", International Conference on Design and Concurrent Engineering-(IDECON 2010, Melaka, MALEZYA, 20-21 Eylül 2010, vol.1, pp.224-228
Çelik H.K., Topakci M., Akinci İ., "Structural Optimization With Fem In Agricultural Engineering: A Case Study For Irrigation Plumbing Element", 37th International Symposium of Agricultural Engineering, Opatija, HIRVATISTAN, 10-13 Şubat 2009, vol.37, pp.497-506
Çelik H.K., Tan Y.S., Seviour R., Rennie A.E.W., "Effect Of Thermal And Mechanical Deformation Of Metamaterial Fdm Components", US-TURKEY Workshop on Rapid Technologies, İSTANBUL, TÜRKIYE, 24-24 Eylül 2009, vol.1, pp.83-88
Yilmaz D., Çelik H.K., Topakci M., Akinci İ., "Fatigue Analysis Of The Mounted Transport Box Based On Finite Element Method", 37th International Symposium of Agricultural Engineering, Opatija, HIRVATISTAN, 10-13 Şubat 2009, vol.37, pp.465-473
Akinci İ., Çanakci M., Yilmaz D., Çelik H.K., "2008, Evaluation Of Turkey’S Tractor Population In Terms Of Economic Life", 10th International Congress on Mechanization and Energy in Agriculture, ANTALYA, TÜRKIYE, 14-17 Ekim 2008, vol.1, pp.77-83
Yilmaz D., Çelik H.K., Akinci İ., "Harvesting And Threshing Mechanization Of Sesame Plant", International Conference of Agricultural Engineering XXXVII Brazilian Agricultural Engineering International livestock Symposium-ILES VIII, Iguassu Falls City, BOUVET ADALARI, 31 Ağustos - 4 Eylül 2008, vol.1, pp.5-5
Çelik H.K., Kabas O., Topakci M., Ozmerzi A., Akinci İ., "Deformation Behavior Simulation Of A Sample Apple Under The Impact Effect With Finite Elements Method", 10th International Congress on Mechanization and Energy in Agriculture, ANTALYA, TÜRKIYE, 14-17 Ekim 2008, vol.1, pp.893-897
Çelik H.K., Yilmaz D., Akinci İ., "Structural Stress Analysis Under The Static Load Of A Tractor Mounted Lifting Apparatus,", International Conference of Agricultural Engineering XXXVII Brazilian Agricultural Engineering International livestock Symposium-ILES VIII, Iguassu Falls City, BREZILYA, 31 Ağustos - 4 Eylül 2008, vol.1, pp.4-4
Çelik H.K., Topakci M., Çanakci M., Akinci İ., "Structural Strength Analysis Of A Subsoiler With Finite Element Method", 5th International Soil Conference ISTRO Czech Branczech Republic, BRNO, CEK CUM., 28 Haziran - 2 Temmuz 2008, vol.1, pp.15-21 (Abstract)
Çelik H.K., Uçar M., Cengiz A.K., "Yüksek Basınçlı Dişli Pompalarda Gövdenin Parametrik Tasarımı, Gerilme Analizi Ve Optimizasyonu", IV. Makine Tasarım ve imalat Teknolojileri Kongresi (IV.MATIT), KONYA, TÜRKIYE, 24-25 Kasım 2007, cilt.1, ss.221-235
Akademik Veri Yönetim Sistemi | All Rights Reserved | Abis Teknoloji © 2019
Akdeniz Üniversitesi BAP Koordinasyon Birimi